BB Tools
BB Corner Radius End Mill-BL2060
BB Corner Radius End Mill-BL2060
Verfügbarkeit für Abholungen konnte nicht geladen werden
|
Dia.of CutΦ |
Dia of shank(D) |
Length of Cut |
Overall Length(L) |
Teeth |
| 1R0.2 | D4 | 3 | 50 | 4T |
| 1.5R0.2 | D4 | 4 | 50 | 4T |
| 2R0.2 | D4 | 5 | 50 | 4T |
| 2R0.5 | D4 | 5 | 50 | 4T |
| 2.5R0.2 | D4 | 7 | 50 | 4T |
| 3R0.2 | D4 | 8 | 50 | 4T |
| 3R0.5 | D4 | 8 | 50 | 4T |
| 3R1 | D4 | 8 | 50 | 4T |
| 4R0.2 | D4 | 10 | 50 | 4T |
| 4R0.3 | D4 | 10 | 50 | 4T |
| 4R0.5 | D4 | 10 | 50 | 4T |
| 4R0.5 | D4 | 12 | 75 | 4T |
| 4R0.5 | D4 | 12 | 100 | 4T |
| 4R1 | D4 | 10 | 50 | 4T |
| 4R1 | D4 | 12 | 75 | 4T |
| 4R1 | D4 | 12 | 100 | 4T |
| 4R1.5 | D4 | 10 | 50 | 4T |
| 5R0.5 | D6 | 13 | 50 | 4T |
| 5R1 | D6 | 13 | 50 | 4T |
| 5R1.5 | D6 | 13 | 50 | 4T |
| 6R0.2 | D6 | 15 | 50 | 4T |
| 6R0.2 | D6 | 18 | 75 | 4T |
| 6R0.5 | D6 | 15 | 50 | 4T |
| 6R0.5 | D6 | 18 | 75 | 4T |
| 6R0.5 | D6 | 20 | 100 | 4T |
| 6R0.5 | D6 | 25 | 150 | 4T |
| 6R1 | D6 | 15 | 50 | 4T |
| 6R1 | D6 | 18 | 75 | 4T |
| 6R1 | D6 | 20 | 100 | 4T |
| 6R1 | D6 | 25 | 150 | 4T |
| 6R1.5 | D6 | 15 | 50 | 4T |
| 6R2 | D6 | 15 | 50 | 4T |
| 6R2 | D6 | 20 | 100 | 4T |
| 6R2 | D6 | 25 | 150 | 4T |
| 8R0.2 | D8 | 20 | 60 | 4T |
| 8R0.5 | D8 | 20 | 60 | 4T |
| 8R0.5 | D8 | 25 | 75 | 4T |
| 8R0.5 | D8 | 25 | 100 | 4T |
| 8R0.5 | D8 | 35 | 150 | 4T |
| 8R1 | D8 | 20 | 60 | 4T |
| 8R1 | D8 | 25 | 75 | 4T |
| 8R1 | D8 | 25 | 100 | 4T |
| 8R1 | D8 | 35 | 150 | 4T |
| 8R1.5 | D8 | 20 | 60 | 4T |
| 8R2 | D8 | 20 | 60 | 4T |
| 8R2 | D8 | 25 | 100 | 4T |
| 8R2 | D8 | 35 | 150 | 4T |
| 8R3 | D8 | 20 | 60 | 4T |
| 8R3 | D8 | 25 | 100 | 4T |
| 10R0.5 | D10 | 25 | 75 | 4T |
| 10R0.5 | D10 | 30 | 100 | 4T |
| 10R0.5 | D10 | 40 | 150 | 4T |
| 10R1 | D10 | 25 | 75 | 4T |
| 10R1 | D10 | 30 | 100 | 4T |
| 10R1 | D10 | 40 | 150 | 4T |
| 10R1.5 | D10 | 25 | 75 | 4T |
| 10R2 | D10 | 25 | 75 | 4T |
| 10R2 | D10 | 30 | 100 | 4T |
| 10R2 | D10 | 40 | 150 | 4T |
| 10R2.5 | D10 | 25 | 75 | 4T |
| 10R3 | D10 | 25 | 75 | 4T |
| 10R3 | D10 | 30 | 100 | 4T |
| 12R0.5 | D12 | 30 | 75 | 4T |
| 12R0.5 | D12 | 36 | 100 | 4T |
| 12R0.5 | D12 | 48 | 150 | 4T |
| 12R1 | D12 | 30 | 75 | 4T |
| 12R1 | D12 | 36 | 100 | 4T |
| 12R1 | D12 | 48 | 150 | 4T |
| 12R1.5 | D12 | 30 | 75 | 4T |
| 12R2 | D12 | 30 | 75 | 4T |
| 12R2 | D12 | 36 | 100 | 4T |
| 12R2 | D12 | 48 | 150 | 4T |
| 12R2.5 | D12 | 30 | 75 | 4T |
| 12R3 | D12 | 30 | 75 | 4T |
| 12R3 | D12 | 36 | 100 | 4T |
| 14R0.5 | D14 | 45 | 100 | 4T |
| 14R0.5 | D14 | 65 | 150 | 4T |
| 14R1 | D14 | 45 | 100 | 4T |
| 14R1 | D14 | 65 | 150 | 4T |
| 14R1.5 | D14 | 65 | 150 | 4T |
| 14R2 | D14 | 45 | 100 | 4T |
| 14R3 | D14 | 45 | 100 | 4T |
| 16R0.5 | D16 | 45 | 100 | 4T |
| 16R0.5 | D16 | 65 | 150 | 4T |
| 16R1 | D16 | 45 | 100 | 4T |
| 16R1 | D16 | 65 | 150 | 4T |
| 16R2 | D16 | 45 | 100 | 4T |
| 16R2 | D16 | 65 | 150 | 4T |
| 16R3 | D16 | 45 | 100 | 4T |
| 16R4 | D16 | 45 | 100 | 4T |
| 20R0.5 | D20 | 45 | 100 | 4T |
| 20R0.5 | D20 | 75 | 150 | 4T |
| 20R1 | D20 | 45 | 100 | 4T |
| 20R1 | D20 | 75 | 150 | 4T |
| 20R2 | D20 | 45 | 100 | 4T |
| 20R2 | D20 | 75 | 150 | 4T |
| 20R3 | D20 | 45 | 100 | 4T |
BB® Tungsten Carbide Corner Radius End Mills
-:Corner radius, uneasy to cracking, widely used in high speed cutting；
-Corner radius to protect cutting edge.reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.
-Surface Machining & Inclined plane machining
Helix Angle:35 deg，high adaptability to the material and hardness of workpieces, widely used to mold and product processing and cost efficient.
BB2055 Series
Color: Copper Density: 14.5 g/cm3
Hardness: HRA 92 Grain Size: 0.6um
Bending Strength: 3000N/mm2
Raw material: Use ZK30UF with 10%Co content and 0.6um grain size.
Coating: TiSiN, with very high surface hardness and good wear resistance.
Suitable for milling general steel under HRC 55, stainless steel, hardened steel, etc
BL2060 Series
- Nano-composite coating
Higher resistance to heat and wear.
- 35°~40° helical angle
Suitable for side machining and finishing.
It is not recommended to machining viscous metals and non-ferrous metals.
BK2060 Series
Geometry :35°
-For general machining. Steel, Stainless steel, magnalium, epoxy plate, durostone, copper electrode, and so on.
Click on the image for more specifications.
BK2063 Series
Geometry :45°
-For High hardness steel.
Unique diamond coating technology, hardened milling cutter body
Click on the image for more specifications.
Our factory
Precise Quality Control Policy - From raw materials to finished products, we insist on a high standard of inspection to make sure every product shares equivalent and stable quality.
Cutting Parameters
vc=120-180m/min ap=1/8-1/2D
ae=1/4-1D fz=0.02-0.2
Please adjust the parameters according to the material and hardness of workpieces.
HI, welcome to BB official store
-We are professional manufacturer, development and production of milling tools.
-We provide various tools for you . You can follow us and see more.
-You have free choice of collocation, pick different specifications and other tools in our store to you cart and pay them together. We will send the products you have picked as a package.
SHIPMENT
-Orders processed timely after the payment verification.We ship products within 3 working days.
-The trade is cross-border, and Airmail is cheapest post which take a long time for delivery.If you need the item urgently ,please choose Express way.
-If you have not received your shipment within 60 days from payment, please contact us. We will track the shipment and get a reply to you as soon as possible.
We sincerely hope that BB tools will meet your full requirements. Please enjoy your online shopping.
