BB Tool
HSS Step Drill | Straight / Spiral Flute | 4–12 / 4–20 / 4–32mm
HSS Step Drill | Straight / Spiral Flute | 4–12 / 4–20 / 4–32mm
Verfügbarkeit für Abholungen konnte nicht geladen werden
Share
HSS Step Drill | Straight & Spiral Flute
Multi-step HSS drill for producing or enlarging several hole diameters with one tool. Available configurations include straight-flute and spiral-flute designs with 4–12mm, 4–20mm and 4–32mm step ranges.
Choose the Right Version
- Step range: select the model that includes the required finished diameter.
- Straight or spiral flute: choose the flute style according to your preferred cutting and chip-removal behavior.
- Workpiece thickness: confirm that the material thickness is suitable for the step length and original usage notes below.
- Machine setup: use controlled speed, secure clamping and cooling where required.
Typical Uses
- Hole enlargement
- Multiple-diameter hole making
- Thin-sheet and general workshop drilling within the product limits stated below


Hole Making & Enlargement
Easy Hole Opening-Reaming
One Drill for Multiple Uses

HSS Step Drill
Designed for controlled drilling and hole enlargement in compatible thin materials.

Double Spiral Groove
Spiral-flute variants support chip evacuation and smoother cutting.

Self-Centering For Easy Positioning
118 ° Type Opening Design
Effectively Reduce Bit Slippage
Material
HSS: Used for wood, plastic, PVC,aluminum, copper, iron within 2mm, steel, etc. HRC<20
HSS-Co:used for plastic, iron, aluminum, steel, stainless steel, etc.HRC<25
! When processing stainless steel, please use it on the bench drilling machine


Shank Design
Round-shank design for secure clamping in a compatible drill chuck.
NOTE
-Can not process glass, tile, wall and stone.
-Please pay attention to cooling when processing.
-Used for materials with thickness less than 5mm.
1、A hand electric drill can be used for thickness below 3mm, and a bench drill is recommended for thickness above 800W and 3-5mm, with a rotating speed below 500 rpm.
2、When using the Drill, it is necessary to add water to keep the temperature down.




FAQ
Can one step drill make several hole sizes?
Yes. Stop drilling at the step corresponding to the required diameter.
Should I check workpiece thickness?
Yes. The original product instructions specify thickness and machine-use limits that should be followed.

