Zu Produktinformationen springen
1 von 6

BB Tool

PRO Carbide PCB Micro Drill Bits | 0.1–3.175mm | 3.175mm Shank | 10 PCS

PRO Carbide PCB Micro Drill Bits | 0.1–3.175mm | 3.175mm Shank | 10 PCS

Normaler Preis $55.00 USD
Normaler Preis Verkaufspreis $55.00 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Hole Diameter
Anzahl

PRO grade — new tungsten carbide, not reground material. Recycled carbide sinters with uneven grain growth and trapped porosity, so the edge chips under load and the hole drifts off size. A uniform fine-grain blank holds its edge far longer, and that is the whole difference in service life.

Mirror-polished flutes clear chips instead of recutting them

A large helical flute with a polished surface lets chips leave the hole instead of being dragged past the cutting edge a second time. Less recutting means less heat at the tip, cleaner hole walls and fewer burrs on breakout.

Where it belongs

PCB and fiberglass boards, composites, plastics, aluminium and brass, in the 0.1–3.175 mm hole range. Run it in a PCB drilling machine, engraving machine or CNC centre with a true-running collet. Handheld drills are not recommended — spindle runout is what breaks micro drills.

Shank diameter is not hole diameter

Every variant shares a 3.175 mm shank; the cutting diameter is the size you select. Check flute length and overall length against your drilling depth before ordering, and keep overhang as short as the job allows.

Running it

Set spindle speed and feed from the material, hole diameter and depth. Chip evacuation — air blast, vacuum or coolant — matters more here than on any larger drill, because a packed micro hole is the usual cause of breakage. Keep collet runout within 0.01 mm.

Packing

10 pcs per size.

Vollständige Details anzeigen