BB Tool
HSS Roughing End Mill | Coarse & Fine Pitch Options
HSS Roughing End Mill | Coarse & Fine Pitch Options
受取状況を読み込めませんでした
Share
BB Tool HSS Roughing End Mills are designed for efficient stock removal. The serrated cutting edges divide chips into smaller sections, helping reduce cutting load and chatter compared with a conventional smooth-edge end mill during roughing operations.
Choose the Tooth Pitch First
- Coarse pitch: larger chip spaces, a practical starting point for heavier stock removal.
- Fine pitch: more cutting teeth, a smoother roughing result under stable conditions.
Coating and Flute Options
The 4-flute options are TiN coated, for steel, iron and general roughing. The 3-flute aluminum option keeps a polished, sharp edge — the right match for the soft, long chips of aluminum and copper.
- TiN Coated-4F: the all-round option for low-carbon steel, iron and general workshop roughing.
- 4Flutes Coarse Teeth / 4Flutes Fine Teeth: the same 4-flute body at two pitch densities, for heavier or finer roughing passes.
- 3F Aluminum: 3-flute geometry, larger chip room and a sharper edge. For aluminum, copper and other non-ferrous materials where evacuation matters more than edge strength.
Workpiece Materials
Low-carbon steel, aluminum, copper, iron and other non-ferrous materials. Match the flute count to the material: 4-flute for steel and iron, 3-flute for aluminum and copper where chips are long and soft.
How to Select a Variant
- Choose coarse or fine pitch for the required roughing strategy.
- Pick the flute count and coating shown in the variant — 4F for steel, 3F for aluminum.
- Match the cutting diameter and shank diameter to the feature and holder.
- Select sufficient flute length, using the shortest practical overall length for rigidity.
Product Detail
















Machining Note
Roughing conditions depend on tool diameter, tooth pitch, workpiece, machine power, setup rigidity and coolant strategy. Begin with conservative engagement and adjust using the applicable shop data or cutting-condition chart.

