BB Pipe Threading Tap G NPT RC PT ZG HSS CO Spiral Straight Flute Fluteless Cobalt Machine Metal CNC Tool

BB HSS Taps (1pcs)

-For CNC
-NO manual
-Recommended RPM 500 ~ 800
-It's better to have a cooling system.(The concentration of cutting fluid should be greater than 13%)

①Straight flute with spiral point.

②Straight flute

③Spiral flute

④Fluteless

Spur Die Sharp Wear-Resistant

The front section is slotted, with chip evacuation on top for easy reconditioning. It is suitable for through holes and blind holes, and can be used on copper or steel materials below 20 degrees.

Application

The pipes commonly used in homes are 2 Inch Pipe, 4Inch Pipe and 6Inch Pipe

Household Regular Series
2 Inch Pipe
4 Inch Pipe
6 Inch Pipe

Select the Tap According to the Thread

The table below lists the tap sizes corresponding to different pipe sizes
The common size of water pipes used in homes is 4Inch Pipe and 6Inch Pipe
Tap Specification
Thread Specification

Select Tap According to the Fitting

Tap Specification
Thread Specification

01 This connection features a 55° Whitworth non-sealing straight pipe thread, where the
outer diameter and inner diameter sizes of the thread are not the same.

02 It is recommended to use calipers for measurement to avoid specification selection errors due to inaccurate measurements.

03 When measuring the diameter, there may be deviations due to thread wear; select the tap size that is closest to the measured size. If still uncertain, contact customer service for recommended sizes.

04 Threads designated as G and BSP are both British Standard Pipe Taper (BSPT) thread
designations with a 55-degree thread angle

Specific Details of Tap Specification

Model Code
The Numbde of Threads Per25.4mm,n
Pitch(P)
TheMajor Diameter(Basic Diameter)d=D
Tap Hole Specification

Specification Sheet

ZG-55°：
English Taper Pipe Thread
Accuracy: ISO Class 2
Chip Disposal: Downward chip disposal
Material: HSS-6542

Z-60°：
American Standard Taper Pipe Threads for Sealing
Accuracy: ISO Class 2
Chip Disposal: Downward chip disposal
Material: HSS-6542

G-55°：
American Standard Straight Pipe Threads for Non-Sealing
Accuracy: ISO Class 2
Chip Disposal: Upward Chip Disposal
Material: HSS-6542

Specification Sheet

1/2 indicates the size of the pipe thread (1/2 inch, commonly known as a four-inch pipe).
14 represents the number of threads per inch (14 threads per inch), so the pitch is 25.4/14.
‘Ｚ’ denotes a 60-degree taper pipe.
‘ZG’ signifies a 55-degree taper pipe.
‘G’ refers to a 55-degree straight pipe thread,
(which is suitable for non-sealing pipe thread processing).
All taps are fully ground (except for the square end of the shank).

G1/8 - The nominal size for the internal bore diameter is 1/8 inch, corresponding to an
external thread diameter of 9.728 mm

G1/4 - The standard dimension for the internal bore diameter is 1/4 inch, with an
external thread diameter of 13.157 mm

G3/8 - The designated size for the internal bore is 3/8 inch, while the nominal outer
thread diameter measures 16.662 mm

G1/2 - The standard dimension for the internal bore diameter is 1/2 inch, with a
nominal outer thread diameter of 20.955 mm

G3/4 - The specified internal bore diameter is 3/4 inch, corresponding to a nominal
outer thread diameter of 26.441 mm

G1 - The standard internal bore diameter is 1 inch, with a nominal outer thread
diameter of 33.249 mm

Thread Designation

G-55 ° non-sealing cylindrical pipe thread system
ZG-55 ° sealing conical pipe thread system
Z-60 ° American taper pipe thread system
NPT-60 ° American standard pipe thread taper pipe thread system
PT-55 ° British Standard Pipe Thread Taper Pipe Thread System
PF-55 ° British non-sealing cylindrical pipe thread system
RP-55 ° British Standard Sealed Cylindrical Internal Thread System
RC-55 ° British sealed cylindrical internal thread system

Instructions for Use

01、Put the Matching Tap Into the Thread
02、Screw it in Clockwise With a Universal Wrench
03、Then Screw it out Counterclockwise
04、The Thread Repair is Complete

Clear Thread Standard Pitch

Tapping resistance is smaller than common taps, it is the choice of through hole machining, standard tooth pitch, no damaged teeth, no burrs.

Sharp Blade Smooth Cutting

The blade has been honed at high density, making it sharper and more stable, harder to wear, and smoother without hairiness

Four-Way Fixed Universal Chuck

The “four way chuck” can be translated to “square collet,” and the entire sentence would be:“Square collet, convenient and fast to use with a manual tap wrench or a tap machine

Tapping Speed Reference

Product Selection Reference
1、 Generally, the speed of tapping will affect the selection of tapping speed due to the cutting material, bottom hole shape, tapping type, tapping material, surface treatment type, cutting oil type, tapping machine type and ability, and other use conditions, so please carefully consider the selection
2、The following table shows the reference table of cutting speed of various cut materials under normal conditions. Please refer to the data on the table and the cutting conditions of the cutting machine itself to select the appropriate cutting speed

HI, welcome to BB official store

-We are professional manufacturer ,development and production of milling tools.
-We provide various tools for you . You can follow us and see more.
-You have free choice of collocation, pick different specifications and other tools in our store to you cart and pay them together. We will send the products you have picked as a package.
-Take an additional 5%~10% off when you buy 10 pieces or more.

SHIPMENT

-We have already paid 80% of delivery cost.And free shipping for sometimes.
-Orders processed timely after the payment verification.We ship products within 3 working days.
-The trade is cross-border, and Airmail is cheapest post which take a long time for delivery.If you need the item urgently ,please choose Express way.
-If you have not received your shipment within 60 days from payment, please contact us. We will track the shipment and get a reply to you as soon as possible.

We sincerely hope that BB tools will meet your full requirements. Please enjoy your online shopping.