Collection: Foret à centrer

Center drills and spot drills create the starting point for a drilled hole. Use a center drill when the hole has to be exactly on position and the drill needs a guide; use an NC spot drill when you only need a chamfer plus a start point on a CNC.

Types

A-type center drill — combined drill and countersink, 60° point. The pilot section locates the hole, the 60° cone forms the seat for a lathe center.

NC spot drill — short rigid body, 60°, 90° or 120° point. Matches the chamfer angle of your screw head so one tool spots and chamfers.

Material

HSS-Co for general work, solid carbide for high rigidity and long runs. Keep the spot depth to roughly the drill diameter — deeper adds no accuracy and wears the tip.