BB Tool
Micro Carbide Drill for Aluminum | 3×D | Ø0.3–3.99mm | 4mm Shank
Micro Carbide Drill for Aluminum | 3×D | Ø0.3–3.99mm | 4mm Shank
Не удалось загрузить сведения о доступности самовывоза
Делиться
BF2055 Micro Carbide Drill for Aluminum & Copper
Designed for precision CNC drilling of aluminum and copper. The BF2055 solid carbide micro drill combines a 3×D drilling design, 4mm shank and external coolant machining for stable small-diameter hole making from Ø0.3 to Ø3.99mm.
| Name: BB Micro Drill Material: Micro-grained carbide | |||||
| Number of flutes: 2 Series: BF2055 | |||||
| Shank diameter: 4mm Application: Aluminum & Copper | |||||
![]() |
|||||
|
Cutting diameter |
Shank diameter (D) |
Cutting length (L) |
Total length (OL) |
Angle | Tolerance |
| 0.3~0.4 | 4 | 4 | 50 | 118° | -0.005 |
| 0.41~0.5 | 4 | 5 | 50 | 118° | -0.005 |
| 0.51~0.99 | 4 | 6 | 50 | 118° | -0.005 |
| 1.0~1.5 | 4 | 8 | 50 | 118° | -0.005 |
| 1.51~2.0 | 4 | 10 | 50 | 118° | -0.005 |
| 1.5 | 4 | 12 | 50 | 118° | -0.005 |
| 2.01~2.5 | 4 | 12 | 50 | 118° | -0.005 |
| 2.51 | 4 | 12 | 50 | 118° | -0.005 |
| 2.5~3.0 | 4 | 15 | 50 | 118° | -0.005 |
| 3.01~3.5 | 4 | 18 | 50 | 118° | -0.005 |
| 3.51~3.99 | 4 | 20 | 50 | 118° | -0.005 |
BF2055 Micro Drill — Solid Carbide Precision Tool
· Solid Carbide Construction: The entire drill bit is crafted from solid carbide, delivering high wear resistance and durability for precision CNC drilling.
· Important Handling Notice: Due to the inherent rigidity of solid carbide, the bit is less tolerant to lateral stress and vibration. Do not use with hand-held electric drills or unstable machining setups.


Precision Edge Grinding & Polishing Process
The edge polishing process enhances both cutting-edge sharpness and surface finish, supporting clean, consistent hole quality in precision drilling.

Ultra-Fine Grain Carbide
Built with an ultra-fine grain carbide substrate for the rigidity and wear resistance required in small-diameter CNC drilling.

Large Core Diameter Design
The large-core geometry supports tool rigidity and drilling stability, helping reduce breakage risk in small-diameter machining.

Passivation & Precision Grinding
Precision grinding and edge treatment help create a clean cutting edge for smoother drilling and consistent tool performance.

Spiral Flute Design for Chip Evacuation
Precision-finished spiral flutes support smooth chip evacuation when drilling aluminum and copper, helping maintain a clean cutting zone.

4mm Round Shank for Stable Clamping
The 4mm round shank provides stable clamping in compatible precision CNC tool holders and machining setups.

Precision Micro-Hole Drilling
Suitable for precision small-diameter hole making in aluminum and copper on CNC milling machines, machining centers and CNC engraving machines.

Recommended materials: Aluminum, copper and similar non-ferrous materials.
Compatible equipment: CNC milling machines, machining centers and CNC engraving machines.
Cooling: External coolant.
Drilling depth: Designed for applications up to approximately 3×D.

Recommended Cutting Conditions
*Reference parameters are general starting points and should be adjusted for the workpiece, machine rigidity, tool overhang and cooling conditions.
*If abnormal noise or vibration occurs, stop machining and adjust the cutting parameters.
*If the machine cannot reach the recommended spindle speed, use the highest stable speed available and adjust feed proportionally.
*Provide sufficient external coolant to the drilling zone and cutting edge.
*The reference parameters are intended for drilling depths up to approximately 3×Dc.
*For small diameters and deeper holes, use appropriate peck drilling according to diameter, depth and chip evacuation conditions.
*Keep drill runout below 0.02mm where possible.
About BB Tool
BB Tool develops and supplies carbide cutting tools for CNC machining. For micro-drilling applications, select the drill diameter, machining material, drilling depth and cooling method according to your machining requirements.



