Skip to product information
1 of 1

BB Tool

3×D Carbide Drill | External Coolant | 8.0–14.0mm

3×D Carbide Drill | External Coolant | 8.0–14.0mm

Regular price $51.50 USD
Regular price Sale price $51.50 USD
Sale Sold out
Shipping calculated at checkout.
Diameter
Quantity

3×D Carbide Drill — 8.0–14.0mm — External Coolant

Solid carbide drill with a 3×D flute for holes up to three times the diameter deep. External coolant, polished flute, for aluminium, copper and other non-ferrous work.

Why 3×D

A 3×D flute keeps the tool short and rigid. On larger diameters that matters: a 14 mm drill at 3×D is far stiffer than the same drill at 5×D, so the hole stays straight and the tip does not walk. For deeper holes step up to the 5×D series.

External coolant

Coolant flows from outside the tool. On aluminium the chip clears easily and carries the heat with it, so external flow is usually enough. Reach for through-tool coolant only when the hole is deep enough that external flow cannot reach the tip.

Reading the size

10.0xD12x52x100 means 10.0 mm diameter, 12 mm shank, 52 mm flute, 100 mm overall.

Materials

  • Aluminium and aluminium alloys
  • Copper, brass, bronze
  • Plastics and composites

Running it

High spindle speed, high feed per tooth, no dwell. Aluminium work-hardens if the edge rubs, so keep the chip load up and clear the chip on every peck.

View full details